Altronix HubSat42D 4 PTC Passive UTP Transceiver Hub with Integral Camera Power w/4 HubWayAv Video Balun/Combiners
|Part Number: HubSat42D|
4 PTC Passive UTP Transceiver Hub with Integral Camera Power w/4 HubWayAv Video Balun/Combiners
Altronix HubSat42D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. Optionally, the HubSat4/4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive UTP Transceiver Hubs. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 4 amp maximum current.
Four (4) PTC proteceted outputs.
Main fuse (internal) is rated at 3.5 amp/250V.
Input 115VAC 50/60Hz, .9 amp.
- RS422/RS485 data input.
- Four (4) channels of quality video over twisted pair up to a distance of
750 ft. per channel.
- Four (4) 75 ohm video outputs.
PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Four (4) individual power LED indicators.
Includes four (4) AC (HubWayAv) Video Balun/Combiners.
Dimensions: 8.5H x 7.5W x 3.5D.
1/2" and 3/4" combination knockouts.