Altronix HubWayLD16Di UL/CUL Listed 16 PTC Active UTP Transceiver Hub w/Integral Isolated Camera Power
|Part Number: HubWayLD16Di|
UL/CUL Listed 16 PTC Active UTP Transceiver Hub w/Integral Isolated Camera Power
Altronix HubWayLD16Di Active UTP Transceiver Hub w/Integral Isolated Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 16 camera channels in a space saving 1U EIA 19 rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Isolated Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLD16Di. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 16 amp maximum current.
Individual electronically isolated PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Primary fuse (internal) is rated at 5 amp/250V.
Input 115VAC 60Hz, 5 amp or 230VAC 50/60Hz, 2.5 amp.
- RS422/RS485 data input.
- Sixteen (16) channels of video over twisted pair up to 3000 ft.
- Sixteen (16) 75 ohm video outputs.
Picture and Gain control.
AC input power indicator.
Sixteen (16) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4D allows transmission of up to four (4) video
signals over a single CAT-5 or higher structured cable.
AC (HubWayAv) and/or DC (HubWayDv/Dvi) Video Balun/Combiners required.
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D.