Altronix HubWayLD83DS Active UTP Transceiver Hub with Integral Camera Power w/eight (8) HubWayDv Video Balun/Combiners
|Part Number: HubWayLD83DS|
Active UTP Transceiver Hub with Integral Camera Power w/eight (8) HubWayDv Video Balun/Combiners
Altronix new HubWayLD83DS Active UTP Transceiver Hub w/Integral CameraPower transmits UTP video, RS422/RS485 data and power over a singleCAT-5 or higher structured cable. Unit provides 8 camera channels in aspace saving 1U EIA 19" rack mount chassis which may be wall or shelfmounted. Video transmission range is up to 3000 ft. max. per channel.Units are compatible with DC fixed or PTZ cameras. An optional HubSat4DPassive UTP Transceiver Hub with Integral Camera Power can be used asan accessory module to transmit video from up to 4 cameras over asingle CAT-5 or higher structured cable back to the HubWayLD8DS. Inaddition, the HubSat4D provides power to these cameras locally toeliminate the possibility of voltage drop associated with long cableruns.
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 5 amp (150VA) maximum current.
PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Picture and Gain control.
Main fuse (internal) is rated at 5 amp/250V.
Input 115VAC 60Hz, 1.5 amp or 230VAC 50/60Hz, 1 amp.
- Two (2) data/PTZ inputs.
- Eight (8) channels of video over twisted pair up to 3000 ft.
- Eight (8) 75 ohm video outputs.
AC input power indicator.
Eight (8) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4D allows transmission of up to four (4) video signals over a
single CAT-5 or higher structured cable.
Includes eight (8) UL Listed Accessory DC (HubWayDv) Video Balun/Combiners.
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D.