Altronix HubWayLD8Di UL/CUL Listed 8 PTC Active UTP Transceiver Hub w/Integral Isolated Camera Power
|Part Number: HubWayLD8Di|
UL/CUL Listed 8 PTC Active UTP Transceiver Hub w/Integral Isolated Camera Power
Altronix HubWayLD8Di Active UTP Transceiver Hub w/Integral IsolatedCamera Power transmits UTP video,RS422/RS485 data and power over a single CAT-5 or higher structuredcable. Unit provides 8 camera channels in aspace saving 1U EIA 19 rack mount chassis which may be rack, wall orshelf mounted. Video transmission range is up to 3000 ft. max. perchannel. Units are compatible with AC and/or DC fixed or PTZ cameraswhen utilizing AltronixHubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, theunit features individually selectable 24VAC or 28VAC PTC protectedoutputs with surge suppression. An optional HubSat4D Passive UTPTransceiver Hub with Integral Isolated Camera Power can be used as anaccessory module to transmit video from up to 4 cameras over a singleCAT-5 or higherstructured cable back to the HubWayLD8Di. In addition, the HubSat4Dprovides power to these cameras locally toeliminate the possibility of voltage drop associated with long cableruns
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 8 amp maximum current.
Individual electronically isolated PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Picture and Gain control.
Primary fuse (internal) is rated at 5 amp/250V.
Input 115VAC 60Hz, 2.5 amp or 230VAC 50/60Hz, 1.5 amp.
- RS422/RS485 data input.
- Eight (8) channels of video over twisted pair up to 3000 ft.
- Eight (8) 75 ohm video outputs.
AC input power indicator.
Eight (8) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4D allows transmission of up to four (4) video
signals over a single CAT-5 or higher structured cable.
AC (HubWayAv) and/or DC (HubWayDv/Dvi) Video Balun/Combiners required.
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D.