Altronix HubWayLD8DS UL Listed Active UTP Transceiver Hub with Integral Camera Power
|Part Number: HubWayLD8DS|
UL Listed Active UTP Transceiver Hub with Integral Camera Power
Altronix new HubWayLD8DS Active UTP Transceiver Hub w/Integral CameraPower transmits UTP video, RS422/RS485 data and power over a singleCAT-5 or higher structured cable. Unit provides 8camera channels in aspace saving 1U EIA 19" rack mount chassis which may be wall or shelfmounted. Video transmission range is up to 3000 ft. max. per channel.Units are compatible with AC and/or DC fixed or PTZ cameras whenutilizing Altronix HubWayAv, HubWayDv or HubWayDvi VideoBalun/Combiners. An optional HubSat4D Passive UTP Transceiver Hub withIntegral Camera Power can be used as an accessory module to transmitvideo from up to 4 cameras over a single CAT-5 or higher structuredcable back to the HubWayLD8DS. In addition, the HubSat4D provides powerto these cameras locally to eliminate the possibility of voltage dropassociated with long cable runs.
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 5 amp (150VA) maximum current.
PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Picture and Gain control.
Main fuse (internal) is rated at 5 amp/250V.
Input 115VAC 60Hz, 1.5 amp or 230VAC 50/60Hz, 1 amp.
- Two (2) data/PTZ inputs.
- Eight (8) channels of video over twisted pair up to 3000 ft.
- Eight (8) 75 ohm video outputs.
AC input power indicator.
Eight (8) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4D allows transmission of up to four (4) video signals over a
single CAT-5 or higher structured cable.
UL Listed Accessory AC (HubWayAv) and/or DC (HubWayDv) Video Balun/Combiners required.
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D