Description
Altronix T1RHW3F4 ALTX/HONEYWELL RACK/4-DOOR SYS
| Part Number: T1RHW3F4 |
| Manufacturer: Altronix |
Description
Buy The Altronix T1RHW3F4 From ACR Security at a Discounted Price, In Stock, Ships Today
Altronix T1RHW3F4 ALTX/HONEYWELL RACK/4-DOOR SYS
-
eFlow6NB Power Supply/Charger
-
Input
- Voltage: 120VAC, 60Hz, 3.5A max.
- Fusing: 5A / 250V.
-
Outputs
- Voltage: Factory set at 24VDC.
- Current: 6A continuous.
- Maximum Supply Current for Main and Aux. Outputs on eFlow6NB Power Supply board, PDS8 Power Distribution Modules and ACM4 Access Power Controllers outputs is 5.6A.
- Auxiliary: Class 2 power-limited @ 1A (unswitched).
- Other: Overvoltage protection. Filtered and regulated.
-
-
Battery Backup
- Type: Sealed lead acid or gel type.
- Fuse Rating: 10A @ 32VDC.
- Failover: Upon AC loss, instantaneous.
-
Fire Alarm Disconnect
- Supervised: Latching or non latching.
- EOL: 10K Resistor.
-
Supervision
- AC Failure: Form C contacts.
- Battery: Form C contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
-
Indicators LED
- Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
-
PDS8 Power Distribution Module
-
Input
- Voltage: 24VDC from eFlow6NB and 12VDC from VR6.
- Fusing: 10A / 250V.
-
Outputs
- Voltage: 12 or 24VDC individually selectable.
- Fuses Rating: 3A / 32VDC.
-
Indicators (LED)
- DC Output: Eight (8) individual output LEDs.
-
-
VR6 Voltage Regulator
-
Input
- Voltage: 24VDC from eFlow6NB.
-
Output
- Voltage: 12VDC.
- Current: 6A continuous.
- Other: Surge suppression.
-
Indicators (LED)
- Input: 24VDC is present.
- Output: Powered.
-
-
ACM4 Access Power Controller
-
Input
- Voltage: 24VDC from eFlow6NB.
- Fusing: 10A / 250V.
-
Outputs
- Voltage: 24VDC.
- Four (4) independently controlled 2.5A outputs:
- a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
- b) Four (4) dry form C 5A rated relay outputs.
- c) Any combination of the above.
- Four (4) auxiliary power outputs (unswitched).
- Fuses Rating: 3A / 32VDC.
-
Indicators (LED's)
- Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
-