Altronix T2SAK75F12 12-Door Altronix/Salto Access and Power Integration Kit
Roll over image to zoom in Click on image to zoom
Altronix T2SAK75F12 12-Door Altronix/Salto Access and Power Integration Kit

Altronix T2SAK75F12 12-Door Altronix/Salto Access and Power Integration Kit

Altronix
filler
Price:
$1,080.31

Description

Altronix T2SAK75F12 12-Door Altronix/Salto Access and Power Integration Kit

Part Number: T2SAK75F12
Manufacturer: Altronix

Description
Buy The Altronix T2SAK75F12 From ACR Security at a Discounted Price, In Stock, Ships Today

12-Door Altronix/Salto Access and Power Integration Kit - Trove2SA2 with eFlow104NB, eFlow102NB, ACM8, ACM4, PDS8


  • eFlow104NB Power Supply/Charger - 1
    • Input
      • Voltage: 120VAC, 60Hz, 4.5A max.
      • Main Fuse: 6.5A / 250V.
    • Output
      • Voltage: 24VDC.
      • Current: 10A continuous.
  • eFlow102NB Power Supply/Charger - 2
    • Input
      • Voltage: 120VAC, 60Hz, 3.5A max.
      • Main Fuse: 5A / 250V.
    • Output
      • Voltage: 12VDC.
      • Current: 10A continuous.
  • Both Power Supplies
    • Outputs
      • Auxiliary: Class 2 power-limited @ 1A (unswitched).
      • Other: Overvoltage protection. Filtered and regulated.
    • Battery Backup (not included)
      • Type: Sealed lead acid or gel type.
      • Fuse Rating: 10A / 32VDC.
      • Failover: Upon AC loss, instantaneous.
    • Fire Alarm Disconnect
      • Supervised: Latching or non-latching.
      • EOL: 10K Resistor.
    • Supervision
      • AC Failure: Form C contacts.
      • Battery: Form C contacts.
      • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units or 71-73% for 12V units. Prevents deep battery discharge.
    • Indicators (LED)
      • AC Input: 120VAC is present.
      • DC Output: Powered.
  • PDS8 Dual Input Power Distribution Module
    • Input
      • Voltage: 24VDC from eFlow104NB and 12VDC from eFlow102NB.
      • Main Fuse: 10A / 32V.
    • Outputs
      • Voltage: 12 or 24VDC individually selectable.
      • Output Fuses: 3A / 32VDC.
    • Indicators (LED)
      • DC Output: Eight (8) individual output LEDs.
      • Green: 12VDC
      • Red: 24VDC.
  • ACM8 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow104NB.
      • Main Fuse: 10A / 250V.
    • Outputs
      • Voltage: 24VDC.
      • Eight (8) independently controlled fused outputs:
      • a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28VAC or VDC @ 2.5A.
      • b) Auxiliary power outputs (unswitched).
      • c) Any combination of the above.
      • Output Fuses: 3.5A / 250V.
    • Indicators (LED)
      • Red LEDs: Outputs are triggered (relays energized).
      • Green LED FACP disconnect is triggered.
  • ACM4 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow104NB.
      • Main Fuse: 10A / 32V.
    • Outputs
      • Voltage: 24VDC.
      • Four (4) independently controlled 2.5A outputs:
      • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
      • b) Four (4) dry form C 5A rated relay outputs.
      • c) Any combination of the above.
      • Four (4) auxiliary power outputs (unswitched).
      • Output Fuses: 3A / 32V.
    • Indicators (LED)
      • Red LEDs: Outputs are triggered (relays energized).
      • Green LED FACP disconnect is triggered.

Recently Viewed Products