Altronix ACMS8 2 INPUT, 8 CH ACCES POWER CONT
Two (2) independent low voltage inputs.
Input 1 and Input 2 voltage range: 5VDC to 24VDC, up to 10A each or 20A total input.
Eight (8) Individually Controlled trigger inputs:
a) Normally open (NO) inputs.
b) Normally closed (NC) inputs.
c) Open collector sink inputs.
d) Wet Input (5VDC - 24VDC) with 10K resistor.
e) Any combination of the above.
Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max.
Do not exceed the individual power supply ratings.
Eight (8) selectable 5VDC - 24VDC independently controlled outputs or eight (8) indepently controlled Form C relay outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
b) Form C Relays. Contacts rated @ 2.5A.
c) Auxiliary power outputs (unswitched).
d) Any combination of the above.
Individual outputs may be set to OFF position for servicing (output jumper set to middle position).
Does not apply to Dry Contact applications.
Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.
Output voltage of each output is the same as the input voltage of the input selected.
Fire Alarm Disconnect
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
Fire Alarm disconnect input options:
a) Normally open [NO] or normally closed [NC] dry contact input. Polarity reversal input from FACP signaling circuit.
FACP output relay [NC] contact or provides 10k resistance with [EOL JMP] intact.
Fuses are rated 2.5A each.
Main input fuses rated @ 15A/32V each.
Red LEDs indicate outputs are triggered.
Blue LED indicates FACP disconnect is triggered.
Individual voltage LEDs
Operating 0ÃºC to 49ÃºC (32ÃºF to 120ÃºF).
Storage -20ÃºC to 70ÃºC (-4ÃºF to 158ÃºF).
Relative Humidity 93% +/-5%.
BTU/Hr. (approx.): 4 BTU/Hr.