Altronix ACMS8CB 2 INPUT, 8 CH ACCES POWER CONT

filler

Price:
Sale price$90.90

Description

Altronix ACMS8CB 2 INPUT, 8 CH ACCES POWER CONT

Part Number: ACMS8CB
Manufacturer: Altronix

Description
Buy The Altronix ACMS8CB From ACR Security at a Discounted Price, In Stock, Ships Today

Altronix ACMS8CB 2 INPUT, 8 CH ACCES POWER CONT

Input
Two (2) independent low voltage inputs.
Input 1 and Input 2 voltage range: 5VDC to 24VDC, up to 10A each or 16A total input.
Eight (8) Individually Controlled trigger inputs:
a) Normally open (NO) inputs.
b) Normally closed (NC) inputs.
c) Open collector sink inputs.
d) Wet Input (5VDC - 24VDC) with 10K resistor.
e) Any combination of the above.
Outputs
PTC protected outputs rated @ 2A per output, Class 2 power-limited. Total output 16A max.
Do not exceed the individual power supply ratings.
Total output current should not exceed max. current rating of the power supplies employed on each input.
Eight (8) selectable 5VDC - 24VDC independently controlled outputs or eight (8) indepently controlled Form C relay outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
b) Form C relays rated @ 2.5A.
c) Auxiliary power outputs (unswitched).
d) Any combination of the above.
Individual outputs may be set to OFF position for servicing (output jumper set to middle position).
Does not apply to Dry Contact applications.
Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2.
Output voltage of each output is the same as the input voltage of the input selected.
Surge suppression.
Fire Alarm Disconnect
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
Fire Alarm disconnect input options:
a) Normally open [NO] or normally closed [NC] dry contact input. Polarity reversal input from FACP signaling circuit.
FACP output relay [NC] contact or provides 10k resistance with [EOL JMP] intact.
Output Ratings
PTC are rated 2A each.
LED Indicators
Red LEDs indicate outputs are triggered.
Blue LED indicates FACP disconnect is triggered.
Individual voltage LEDs
Green: 12VDC
Red: 24VDC.
Temperature
Operating 0úC to 49úC (32úF to 120úF).
Storage -20úC to 70úC (-4úF to 158úF).
Relative Humidity 93% +/-5%.
BTU/Hr. (approx.): 4 BTU/Hr.

Recently Viewed Products