Altronix AL602ULADAJ NAC Power Extender, 24VDC @ 6.5A, Class 2,Large Enclosure


Sale price$384.34


Altronix AL602ULADAJ NAC Power Extender, 24VDC @ 6.5A, Class 2,Large Enclosure

Part Number: AL602ULADAJ
Manufacturer: Altronix

Altronix AL602ULADAJ

NAC Power Extender, 24VDC @ 6.5A, Class 2, Large Enclosure

Model AL602ULADAJ is an extremely cost effective 6.5 amp voltage regulated remote power supply/batterycharger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications includeNotification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also providesauxiliary power to support system accessories. The unit delivers regulated and filtered 24 volt power to ClassB or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectorsis available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering NAC devices.Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or StrobeSynchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. MarchTime Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm conditionindependent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a looptrouble the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble outputterminals (NC, C, NO) which are used to indicate general loop/system trouble. A common trouble input is provided foroptional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed anddirected to control supervision and power delivery to any combination of the four (4) outputs. The unit also features LoopOutput trouble memory indication to help identify troublesome sporadic problems.

Power Supply/Charger:
24VDC output.
6.5 amp max total alarm current.
115VAC 60Hz., 3.2 amp.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp.
Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.

Logic Board:
Class 2 Rated power limited outputs.
Two (2) Class A or two (2) Class B FACP inputs.
Two (2) Class A or four (4) Class B Indicating Circuits.
Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up).
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and
unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occured on one or
more signaling circuit outputs.
Input to Output Follower Mode (maintains synchronization of notification appliance circuits).
Compatible with 24VDC or 12VDC fire panels.
Common Trouble inputs and outputs.
Ground fault detection.
Lifetime Warranty.

Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions: 15.5H x 12W x 4.5D.
1/2" and 3/4" combination knockouts.

Data Sheet

Recently Viewed Products