Altronix HubWay8Di UL/CUL Listed 8 PTC Passive UTP Transceiver Hub with Integral Isolated Camera Power
|Part Number: HubWay8Di
UL/CUL Listed 8 PTC Passive UTP Transceiver Hub with Integral Isolated Camera Power
Altronix HubWay8Di Passive UTP Transceiver Hub w/Integral IsolatedCamera Power transmits UTP video,RS422/RS485 data and power over a single CAT-5 or higher structuredcable. Unit provides 8 camera channels in aspace saving 1U EIA 19 rack mount chassis which may be rack, wall orshelf mounted. Video transmission range is up to 750 ft. max. perchannel. Units are compatible with AC and/or DC fixed or PTZ cameraswhen utilizing AltronixHubWayAv or HubWayDv Video Balun/Combiners. In addition, the unitfeatures individually selectable 24VAC or 28VAC electronically isolatedPTC protected outputs with surge suppression. An optional HubSat4i/4DiPassive UTP TransceiverHub with Integral Isolated Camera Power can be used as an accessorymodule to transmit video from up to 4 cameras over a single CAT-5 orhigher structured cable back to the HubWay8Di. In addition, theHubSat4D provides power to thesecameras locally to eliminate the possibility of voltage drop associatedwith long cable runs.
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 8 amp maximum current.
Individual electronically isolated PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Primary fuse (internal) is rated at 5 amp/250V.
Input 115VAC 60Hz, 2.5 amp or 230VAC 50/60Hz, 1.5 amp.
- RS422/RS485 data input.
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
AC input power indicator.
Eight (8) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4Di allows transmission of up to four (4) video
signals over a single CAT-5 or higher structured cable.
UL Listed Accessory AC (HubWayAv) and/or DC (HubWayDv/Dvi) Video Balun/Combiners required.
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D.