Altronix HubWay8DS UL Listed Passive UTP Transceiver Hub with Integral Camera Power
|Part Number: HubWay8DS|
UL Listed Passive UTP Transceiver Hub with Integral Camera Power
Altronix new HubWay8DS Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8DS. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total
of 5 amp (150VA) maximum current.
PTCs are rated @ 1 amp per channel.
Class 2 Rated power limited outputs.
Main fuse (internal) is rated at 5 amp/250V.
Input 115VAC 60Hz, 1.5 amp or 230VAC 50/60Hz, 1 amp.
- Two (2) data/PTZ inputs.
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
AC input power indicator.
Eight (8) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4D allows transmission of up to four (4) video signals over a
single CAT-5 or higher structured cable.
UL Listed Accessory AC (HubWayAv) and/or DC (HubWayDv/Dvi) Video Balun/Combiners required.
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D.