Description
Altronix LINQ8ACMCB 8 PTC NETWORK ACCESS PWR CONT
| Part Number: LINQ8ACMCB |
| Manufacturer: Altronix |
Description
Buy The Altronix LINQ8ACMCB From ACR Security at a Discounted Price, In Stock, Ships Today
Altronix LINQ8ACMCB 8 PTC NETWORK ACCESS PWR CONT
Input
Two (2) Independent Low Voltage Inputs.
Input Voltage Options:
Single Input:
Input1:
12 or 24 VDC from eFlow series power supply.
Dual Input Option 1:
Input 1:
12 or 24 VDC from eFlow series power supply.
Input 2:
a) 12 or 24 VDC from eFlow series power supply.
b) 5 or 12 VDC from VR6 voltage regulator.
Dual Input Option 2:
12 and 24 VDC from Tango1B PoE Driven Power Supply.
Voltage Range
5VDC to 24VDC up to 10A each or 16A total input.
Current Consumption: 0.6A @ 12V, 0.3A @ 24V with all relays energized.
Main Fuse Rating: 15/32A.
Outputs
PTC protected outputs rated @ 2A per output, Class 2 power-limited. Total output 16A max.
Do not exceed the individual power supply ratings.
Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Output Ratings
PTCs are rated 2A each.
Total output current is determined by the power supply(ies), not to exceed a maximum of 10A for each input.
Programming Features
Eight (8) Programmable Outputs:
Fail-safe, fail-secure or auxiliary outputs.
Input controlled or manually controlled through software.
High (over) and low (under) voltage and current monitoring by output.
Multiple outputs may be programmed to be triggered by a single input.
Battery back-up by output.
Eight (8) Programmable Trigger Inputs:
Normally open (NO).
Normally colsed (NC).
Open collector sink inputs.
Wet Input (5VDC - 24VDC) with 10k resistor.
Any combination of the above.
Other Programmable Trigger Inputs:
Monitor power supply(ies) input for voltage and currect limits (high/low).
Input and output current calibration.
Programmable timer events.
Programmable user levels.
Enable or disable alerts by type.
Programmable alert reporting delay.
Fire Alarm Disconnect
Supervised: Inactive, latching or non-latching, individually selectable for any or all of the eight (8) outputs.
EOL: 10K Resistor.
LED Indicators
Green AC LED: indicates AC trouble condition.
Green BAT LED: indicates battery trouble condition.
Green FACP LED: indicates FACP disconnect is triggered.
Flashing Blue Heartbeat LED: indicates network connection.
Individual OUT1 - OUT8 Red LEDs: indicate outputs are triggered.
Individual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red).
Electrical
Temperature:
Operating: 0ð C to 49ð C (32ð F to 120ð F).
Storage: - 20ð C to 70ð C ( - 4ð F to 158ð F).
Relative Humidity 93% +/- 5%.
BTU/Hr (approx.): 4 BTU/Hr.
Mounting hardware included.