Description
Altronix NetWay8M Eight (8) Port PoE Managed Midspan Injector
Part Number: NetWay8M |
Manufacturer: Altronix |
Description
Altronix NetWay8M
Eight (8) Port PoE Managed Midspan Injector
The NetWay8M Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 adapters
Eight (8) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m (328 ft.) per port.
115VAC 60Hz, 3 amp input.
Power:
Unit provides up to 30W max. full power per port.
Total power: 150W.
IEEE 802.3af and IEEE 802.3at compliant (PoE Plus).
Short circuit protection.
Functions:
Programmable PoE shutdown for each port.
Utilized to reset cameras/edge devices.
Auto detection and protection of legacy non-PoE cameras/edge devices.
Features:
LAN or laptop connection enables programming of PoE shutdown and port monitoring.
User interface.
Illuminated master power disconnect circuit breaker with manual reset (switch).
Individual port status LEDs.
IEC 320 - 3-wire grounded line cord (detachable).
Unit can be rack or shelf mounted.
Eight (8) Port PoE Managed Midspan Injector
The NetWay8M Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 adapters
Eight (8) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m (328 ft.) per port.
115VAC 60Hz, 3 amp input.
Power:
Unit provides up to 30W max. full power per port.
Total power: 150W.
IEEE 802.3af and IEEE 802.3at compliant (PoE Plus).
Short circuit protection.
Functions:
Programmable PoE shutdown for each port.
Utilized to reset cameras/edge devices.
Auto detection and protection of legacy non-PoE cameras/edge devices.
Features:
LAN or laptop connection enables programming of PoE shutdown and port monitoring.
User interface.
Illuminated master power disconnect circuit breaker with manual reset (switch).
Individual port status LEDs.
IEC 320 - 3-wire grounded line cord (detachable).
Unit can be rack or shelf mounted.