Altronix T1RV3F4 ALTX/VERTX RACK / 4-DOOR SYS

filler

Price:
Sale price$888.27

Description

Altronix T1RV3F4 ALTX/VERTX RACK / 4-DOOR SYS

Part Number: T1RV3F4
Manufacturer: Altronix

Description
Buy The Altronix T1RV3F4 From ACR Security at a Discounted Price, In Stock, Ships Today

Altronix T1RV3F4 ALTX/VERTX RACK / 4-DOOR SYS

  • eFlow6NB Power Supply/Charger
    • Input
      • Voltage: 120VAC, 60Hz, 3.5A max.
      • Fusing: 5A / 250V.
    • Output
      • Voltage: Factory set at 24VDC.
      • Current: 6A continuous.
      • Maximum Supply Current for Main and Aux. Outputs on eFlow6NB Power Supply board, PDS8 Power Distribution Modules and ACM4 Access Power Controllers outputs is 5.6A.
      • Auxiliary: Class 2 power-limited @ 1A (unswitched).
      • Other: Overvoltage protection. Filtered and regulated.
  • Battery Backup
    • Type: Sealed lead acid or gel type.
    • Fuse Rating: 10A @ 32VDC.
    • Failover: Upon AC loss, instantaneous.
  • Fire Alarm Disconnect
    • Supervised: Latching or non latching.
    • EOL: 10K Resistor.
  • Supervision
    • AC Failure: Form C contacts.
    • Battery: Form C contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.
  • Indicators LED
    • Input: 120VAC is present.
    • DC Output: Powered.
    • Battery: Discharged or not connected.
  • ACM4 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow6NB.
      • Fusing: 10A / 250V.
    • Output
      • Voltage: 24VDC.
      • Four (4) independently controlled 2.5A outputs:
      • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
      • b) Four (4) dry form C 5A rated relay outputs.
      • c) Any combination of the above.
      • Four (4) auxiliary power outputs (unswitched).
      • Output Fuses: 3A / 32VDC.
    • Indicators (LED)
      • Red LEDs: Outputs are triggered (relays energized).
      • Blue LED: FACP disconnect is triggered.
  • PDS8 Power Distribution Module
    • Input
      • Voltage: 24VDC from eFlow6NB and 12VDC from VR6.
      • Fusing: 10A / 250V.
    • Output
      • Voltage: 12 or 24VDC individually selectable.
      • Output Fuses: 3A / 32VDC.
    • Indicators (LED)
      • DC Output: Eight (8) individual output LEDs.
      • Green: 12VDC
      • Red: 24VDC.
  • VR6 Voltage Regulator
    • Input
      • Voltage: 24VDC from eFlow6NB.
    • Output
      • Voltage: 12VDC.
      • Current: 6A continuous.
      • Other: Surge suppression.
    • Indicators (LED)
      • Input: 24VDC is present.
      • Output: Powered.

Recently Viewed Products