Altronix T1SAK3F4 TROVE1SA1, 12/24VDC@6A, FUSED


Sale price$582.16


Altronix T1SAK3F4 TROVE1SA1, 12/24VDC@6A, FUSED

Part Number: T1SAK3F4
Manufacturer: Altronix

Buy The Altronix T1SAK3F4 From ACR Security at a Discounted Price, In Stock, Ships Today

Altronix T1SAK3F4 TROVE1SA1, 12/24VDC@6A, FUSED

  • eFlow6NB Power Supply/Charger
    • Input
      • Voltage: 120VAC, 60Hz, 3.5A max.
      • Fusing: 5A / 250V.
    • Outputs
      • Voltage: 12VDC or 24VDC selectable.
      • Current: 6A continuous max.
      • Auxiliary: Power-limited @ 1A (unswitched).
      • Other: Overvoltage protection. Filtered and regulated.
  • Battery Backup (not included)
    • Type: Sealed lead acid or gel type.
    • Fuse Rating: 10A @ 32VDC.
    • Failover: Upon AC loss, instantaneous.
  • Fire Alarm Disconnect
    • Supervised: Latching or non latching.
    • EOL: 10K Resistor.
  • Supervision
    • AC Failure: Form C contacts.
    • Battery: Form C contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • Indicators LED
    • Input: 120VAC is present.
    • DC Output: Powered.
  • PDS8 Dual Input Power Distribution Module
    • Input
      • Voltage: 24VDC from eFlow6NB and 12VDC from VR6.
      • Main Fuse: 10A / 32V.
    • Outputs
      • Voltage: 12VDC and/or 24VDC.
      • Voltage: Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.
      • Individual outputs may be set to OFF position for servicing.
      • Output Fuses: 3A / 32V.
    • Indicators (LED)
      • DC Output: Eight (8) individual output LEDs.
      • Green: 12VDC
      • Red: 24VDC.
  • VR6 Voltage Regulator
    • Input
      • Voltage: 24VDC from eFlow6NB.
    • Output
      • Voltage: 12VDC.
      • Current: 6A continuous.
      • Other: Surge suppression.
    • Indicators LED
      • Input: 24VDC is present.
      • Output: Powered.
  • ACM4 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow6NB.
      • Main Fuse: 10A / 32V.
    • Outputs
      • Voltage: 24VDC.
      • Four (4) independently controlled 2.5A outputs:
      • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
      • b) Four (4) dry form C 5A rated relay outputs.
      • c) Any combination of the above.
      • Four (4) auxiliary power outputs (unswitched).
      • Output Rating: 3A / 32VDC.
    • Indicators (LED's)
      • Red LEDs: Outputs are triggered (relays energized).
      • Green LED: FACP disconnect is triggered.

Recently Viewed Products