Altronix T2CVK7F10 10-Door Altronix/CDVI Access and Power Integration Kit
Roll over image to zoom in Click on image to zoom
Altronix T2CVK7F10 10-Door Altronix/CDVI Access and Power Integration Kit

Altronix T2CVK7F10 10-Door Altronix/CDVI Access and Power Integration Kit

Altronix
filler
Price:
$835.20

Description

Altronix T2CVK7F10 10-Door Altronix/CDVI Access and Power Integration Kit

Part Number: T2CVK7F10
Manufacturer: Altronix

Description
Buy The Altronix T2CVK7F10 From ACR Security at a Discounted Price, In Stock, Ships Today

10-Door Altronix/CDVI Access and Power Integration Kit - Trove2CV2 with eFlow104NB, ACM8, ACM4, PD8UL

  • eFlow104NB Power Supply/Charger
    • Input
      • Voltage: 120VAC, 60Hz, 4.5A max.
      • Input Fuse: 6.3A / 250V.
    • Output
      • Voltage: 24VDC @ 10A.
      • Auxiliary: 1A (unswitched).
      • Protection: Overvoltage protection. Filtered and regulated.
  • Battery Backup (not included)
    • Type: Sealed lead acid or gel type.
    • Fuse Rating: 10A @ 32VDC.
    • Failover: Upon AC loss, instantaneous.
  • Fire Alarm Disconnect
    • Supervised: Latching or non-latching.
    • EOL: 10K Resistor.
  • Supervision
    • AC Failure: Form C contacts.
    • Battery: Form C contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.
  • Indicators LED
    • AC Input: 120VAC is present.
    • DC Output: Powered.
    • Battery: Discharged or not connected.
  • ACM8 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow104NB.
      • Main Fuse: 10A / 32V.
    • Outputs
      • Voltage: 24VDC.
      • Eight (8) independently controlled fused outputs:
      • a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28VAC or VDC @ 2.5A.
      • b) Auxiliary power outputs (unswitched).
      • c) Any combination of the above.
      • Eight (8) auxiliary power outputs (unswitched).
      • Output Fuses: 3.5A/250V.
    • Indicators (LED)
      • Red LEDs: Outputs are triggered (relays energized).
      • Green LED: FACP disconnect is triggered.
  • ACM4 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow104NB.
      • Main Fuse: 10A/320V.
    • Outputs
      • Voltage: 24VDC.
      • Four (4) independently controlled 2.5A outputs:
      • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
      • b) Four (4) dry form C 5A rated relay outputs.
      • c) Any combination of the above.
      • Four (4) auxiliary power outputs (unswitched).
      • Output Fuses: 3A / 32VDC.
    • Indicators (LED)
      • Red LEDs: Outputs are triggered (relays energized).
      • Green LED: FACP disconnect is triggered.
  • PDS8UL Power Distribution Module
    • Input
      • Voltage: 24VDC from eFlow104NB.
    • Outputs
      • Voltage: 24VDC.
      • Eight (8) fuse protected outputs.
      • 3.5A per output max.
      • Output Fuses: 3.5A/250V.
    • Indicators (LED)
      • Green LED: DC Output.

Recently Viewed Products