Altronix T2KK3F8DQ 8-Door Altronix/Keyscan Access and Power Integration Kit

Altronix T2KK3F8DQ 8-Door Altronix/Keyscan Access and Power Integration Kit

• eFlow6NB Power Supply/Charger

  • Input

    • Voltage: 120VAC, 60Hz, 3.5A max.
    • Input Fuse: 5A / 250V.

  • Output

    • Voltage: Factory set at 24VDC.
    • Current: 6A continuous.
    • Auxiliary: Class 2 power-limited @ 1A (unswitched).
    • Other: Overvoltage protection. Filtered and regulated.

• Battery Backup (not included)

  • Type: Sealed lead acid or gel type.
  • Fuse Rating: 10A @ 32VDC.
  • Failover: Upon AC loss, instantaneous.

• Fire Alarm Disconnect

  • Supervised: Latching or non-latching.
  • EOL: 10K Resistor.

• Supervision

  • AC Failure: Form C contacts.
  • Battery: Form C contacts.
  • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.

• Indicators LED

  • Input: 120VAC is present.
  • DC Output: Powered.
  • Battery: Discharged or not connected.

• LINQ2 Network Communication Module

  • Status Monitoring

    • AC status; Output current draw; Units temperature; DC output voltage; Low Battery/Battery presence detection.
    • Input trigger state change; Output (relay and power supply) state change.

  • Programming

    • Battery service date indication.
    • Programmable via USB or web browser.
    • Automated timed events:
    • - Control output relays and power supply via flexible timing parameter.

  • Reporting

    • Programmable dashboard notifications.
    • E-mail notification selectable by event.
    • Event log tracks history (100+ events).

  • Indicators LED

    • Blue LED: Power ON.

• T16100 Transformer

  • Input

    • Voltage: 115VAC, 50/60Hz, 1A.

  • Output

    • Voltage: 16VAC/100VA. 6.25A supply current.

• ACM8CB Access Power Controller

  • Input

    • Voltage: 24VDC from eFlow6NB.
    • Input Fuse: 10A / 250V.

  • Outputs

    • Class 2 power-limited auto-resettable outputs.
    • Voltage: 24VDC.
    • Eight (8) independently controlled PTC outputs:
    • a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28VAC or VDC @ 2.5A.
    • b) b) Any combination of the above.
    • Output PTCs: 2.5A.

  • Indicators (LED)

    • Red LEDs: Outputs are triggered (relays energized).
    • Green LED: FACP disconnect is triggered.