Altronix T2MK75F16Q 16-Door Altronix/Mercury-Lenel Access and Power Integration Kit

Altronix T2MK75F16Q 16-Door Altronix/Mercury-Lenel Access and Power Integration Kit

• eFlow104NB Power Supply/Charger - 1

  • Input

    • Voltage: 120VAC, 60Hz, 4.5A max.
    • Main Fuse: 6.3A / 250V.

  • Output

    • Voltage: 24VDC @ 10A.
    • Auxiliary: 1A (unswitched).
    • Protection: Overvoltage protection. Filtered and regulated.

• eFlow102NB Power Supply/Charger - 2

  • Input

    • Voltage: 120VAC, 60Hz, 3.5A max.
    • Main Fuse: 5A / 250V.

  • Output

    • Voltage: 24VDC @ 10A.
    • Auxiliary: 1A (unswitched).
    • Protection: Overvoltage protection. Filtered and regulated.

• Both Power Supplies

  • Battery Backup (not included)

    • Type: Sealed lead acid or gel type.
    • Fuse Rating: 15A/32VDC.
    • Failover: Upon AC loss, instantaneous.

  • Fire Alarm Disconnect

    • Supervised: Latching or non-latching.
    • EOL: 10K Resistor.

  • Supervision

    • AC Failure: Form C contacts.
    • Battery: Form C contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.

  • Indicators LED

    • AC Input: 24VDC is present.
    • DC Output: Powered.
    • Battery: Discharged or not connected.

• LINQ2 Network Communication Module

  • Status Monitoring

    • AC status; Output current draw; Units temperature; DC output voltage; Low Battery/Battery presence detection.
    • Input trigger state change; Output (relay and power supply) state change.

  • Programming

    • Battery service date indication.
    • Programmable via USB or web browser.
    • Automated timed events:
    • - Control output relays and power supply via flexible timing parameter.

  • Reporting

    • Programmable dashboard notifications.
    • E-mail notification selectable by event.
    • Event log tracks history (100+ events).

  • Indicators LED

    • Blue LED: Power ON.

• ACM8 Access Power Controller

  • Input

    • Voltage: 24VDC from eFlow104NB.
    • Input Fuse: 10A / 250V.

  • Outputs

    • Voltage: 24VDC.
    • Eight (8) 24VDC independently controlled fused outputs:
    • a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28VAC or VDC @ 2.5A.
    • b) Auxiliary power outputs (unswitched).
    • c) Any combination of the above.
    • Output Fuses: 3.5A/250V.

  • Indicators (LED)

    • Red LEDs: Outputs are triggered (relays energized).
    • Green LED: FACP disconnect is triggered.

• PD16W Power Distribution Module

  • Input

    • Voltage: 12VDC from eFlow102NB.

  • Output

    • Voltage: 12VDC.
    • Fuses: 3.5A/250V.

  • Indicators LED

    • Green LED: DC Output.