Altronix T2PXK7F8 8-Door Altronix/Paxton Access and Power Integration Kit

filler

Price:
Sale price$720.96

Description

Altronix T2PXK7F8 8-Door Altronix/Paxton Access and Power Integration Kit

Part Number: T2PXK7F8
Manufacturer: Altronix

Description
Buy The Altronix T2PXK7F8 From ACR Security at a Discounted Price, In Stock, Ships Today

8-Door Altronix/Paxton Access and Power Integration Kit - Trove2PX2 with eFlow104NB, ACM8, VR6, PDS8


eFlow104NB Power Supply/Charger
Input
Voltage: 120VAC, 60Hz, 4.5A max.
Main Fuse: 6.3A / 250V.
Outputs
Voltage: 24VDC @ 10A.
Auxiliary: 1A (unswitched).
Protection: Overvoltage protection. Filtered and regulated.
Battery Backup (not included)
Type: Sealed lead acid or gel type.
Fuse Rating: 10A/32VDC.
Failover: Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised: Latching or non-latching.
EOL: 10K Resistor.
Supervision
AC Failure: Form C contacts.
Battery: Form C contacts.
Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units. Prevents deep battery discharge.
Indicators LED
AC Input: 120VAC is present.
DC Output: Powered.
Battery: Discharged or not connected.
ACM8 Access Power Controller
Input
Voltage: 12VDC from eFlow102NBV.
Main Fuse: 10A / 32V.
Outputs
Voltage: 12VDC.
Eight (8) 24VDC independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28VAC or VDC @ 2.5A.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above.
Output Fuses: 3.5A / 32VDC.
Indicators (LED)
Red LEDs: Outputs are triggered (relays energized).
Green LED: FACP disconnect is triggered.
VR6 Voltage Regulator
Input/Output
Voltage Range: 24VDC @ 3.5A = Output: 12VDC @ 6A.
Output
Voltage: 12VDC regulated output.
Output rating: 6A max.
Other: Surge suppression.
Indicators LED
Input: Indicates input voltage is present.
Output: Indicates normal operating condition.
PDS8 Dual Output Power Distribution Module
Input
Voltage Range: 5VDC to 24VDC, up to 10A each, 20A total input.
Main Fuse Rating: 10A.
Outputs
Fuse protected outputs rated @ 3A per output, non power-limited. Total output 20A max.
Do not exceed the individual power supply ratings.
Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Outputs Ratings
Voltage Range: 4.8VDC - 24VDC.
Indicators (LED)
DC Output: Individual voltage LEDs indicate 12VDC (Green) or 24VDC (Red/Green).
Features
Multiple units may be daisy-chained to accommodate larger systems.

Recently Viewed Products