Altronix T2VK7F8 8-Door Altronix/HID VertX® Access and Power Integration Kit


Sale price$822.95


Altronix T2VK7F8 8-Door Altronix/HID VertX® Access and Power Integration Kit

Part Number: T2VK7F8
Manufacturer: Altronix

Buy The Altronix T2VK7F8 From ACR Security at a Discounted Price, In Stock, Ships Today

8-Door Altronix/HID VertX® Access and Power Integration Kit - Trove2V2 with eFlow104NB, ACM8, VR6,PDS8

  • eFlow104NB Power Supply/Charger
    • Input
      • Voltage: 120VAC, 60Hz, 4.5A max.
      • Main Fuse: 6.5A / 250V.
    • Outputs
      • Voltage: 24VDC.
      • Current: 10A continuous.
      • Auxiliary: Class 2 power-limited @ 1A (unswitched).
      • Other: Overvoltage protection. Filtered and regulated.
  • Battery Backup (not included)
    • Type: Sealed lead acid or gel type.
    • Fuse Rating: 10A/32VDC.
    • Failover: Upon AC loss, instantaneous.
  • Fire Alarm Disconnect
    • Supervised: Latching or non-latching.
    • EOL: 10K Resistor.
  • Supervision
    • AC Failure: Form C contacts.
    • Battery: Form C contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.
  • Indicators LED
    • Input: 120VAC is present.
    • DC Output: Powered.
  • PDS8 Dual Input Power Distribution Module
    • Input
      • Voltage: 24VDC from eFlow6NB and 12VDC from VR6.
      • Main Fuse: 10A / 32V.
    • Outputs
      • Voltage: 12 and/or 24VDC.
      • Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.
      • Individual outputs may be set to OFF position for servicing.
      • Output Fuses: 3A / 32V.
    • Indicators (LED)
      • DC Output: Eight (8) individual output LEDs.
      • Green: 12VDC
      • Red: 24VDC.
  • VR6 Voltage Regulator
    • Input
      • Voltage: 24VDC from eFlow6NB.
    • Output
      • Voltage: 12VDC.
      • Current: 6A continuous.
      • Other: Surge suppression.
    • Indicators LED
      • Input: 24VDC is present.
      • Output: Powered.
  • ACM8 Access Power Controller
    • Input
      • Voltage: 24VDC from eFlow104NB.
      • Main Fuse: 10A / 250V.
    • Outputs
      • Voltage: 24VDC.
      • Eight (8) independently controlled fused outputs:
      • a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28VAC or VDC @ 2.5A.
      • b) Auxiliary power outputs (unswitched).
      • c) Any combination of the above.
      • Output Fuses: 3.5A / 250V.
    • Indicators (LED)
      • Red LEDs: Outputs are triggered (relays energized).
      • Green LED: FACP disconnect is triggered.

Recently Viewed Products