Altronix T3HWK75F16D 16-Door Altronix/Honeywell Access and Power Integration Kit

Altronix T3HWK75F16D 16-Door Altronix/Honeywell Access and Power Integration Kit

• eFlow104NB Power Supply/Charger - 1

  • Input

    • Voltage: 120VAC, 60Hz, 4.5A max.
    • Main Fuse: 6.5A / 250V.

  • Output

    • Voltage: 24VDC.
    • Current: 10A continuous.

• eFlow102NB Power Supply/Charger - 2

  • Input

    • Voltage: 120VAC, 60Hz, 3.5A max.
    • Main Fuse: 5A / 250V.

  • Output

    • Voltage: 12VDC.
    • Current: 10A continuous.

• Both Power Supplies

  • Outputs

    • Auxiliary: Class 2 power-limited @ 1A (unswitched).
    • Other: Overvoltage protection. Filtered and regulated.

  • Battery Backup (not included)

    • Type: Sealed lead acid or gel type.
    • Fuse Rating: 10A / 32VDC.
    • Failover: Upon AC loss, instantaneous.

  • Fire Alarm Disconnect

    • Supervised: Latching or non-latching.
    • EOL: 10K Resistor.

  • Supervision

    • AC Failure: Form C contacts.
    • Battery: Form C contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units or 71-73% for 12V units. Prevents deep battery discharge.

  • Indicators (LED)

    • AC Input: 120VAC is present.
    • DC Output: Powered.

• PD8ULCB Power Distribution Module

  • Input

    • Voltage: 24VDC from eFlow104NB.

  • Outputs

    • Voltage: 24VDC.
    • Eight (8) PTC protected outputs. 2.5A per output max.
    • Output PTCs: 2.5A.

  • Indicators (LED)

    • Green LED: DC Output.

• Two (2) ACM8CB Access Power Controllers

  • Input

    • Voltage: 24VDC from eFlow104NB.
    • Input Fuse: 10A / 250V.

  • Outputs

    • Voltage: 24VDC.
    • Eight (8) independently controlled fused outputs:
    • a) Fail-Safe and/or Fail-Secure power outputs.
    • b) Auxiliary power outputs (unswitched).
    • c) Any combination of the above.
    • Output PTCs: 2.5A

  • Indicators (LED)

    • Red LEDs: Outputs are triggered (relays energized).
    • Green LED: FACP disconnect is triggered.