Altronix TANGO8AP PoE Driven Multi-Output Power Supply/Charger With Access Power Controller

Altronix TANGO8AP PoE Driven Multi-Output Power Supply/Charger With Access Power Controller

• Ethernet Input

  • 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W

• Power Output (when using 802.3bt 90W)

  • 12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W).
  • Combined output not to exceed 65W.

  • When charging batteries:

    • 12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W).
    • Combined output not to exceed 55W.

• Ethernet Output

  • Pass-through Ethernet Port (data only).

• Battery Charging Circuit

  • 12VDC battery charger for Lithium Iron Phosphate Battery (LiFePO4 only).
  • Unique technology allows for single battery to backup 12VDC and/or 24VDC systems

• Supervision

  • Loss of PoE Input.
  • Battery Supervision.

• Indicators (LED)

  • Input: Indicates input voltage is present.
  • Output: Indicates normal operating condition.
  • PoE Type: PoE Class Indicator
  • Supervision: PoE Fail or BAT Fail.

• PDS8/PDS8CB Power Distribution Module:

  • Inputs

    • 12VDC and 24VDC from Tango1B, factory wired.
    • Main Fuse Rating 10A/32V.

  • Outputs

    • Fuse protected outputs rated @ 3A per output, non power-limited. Total output 20A max.

• Indicators (LED)

  • DC Output: Individual voltage LEDs indicate 12VDC (Green) or 24VDC (Green and Red).

• ACMS8/ACMS8CB Access Power Controller:

  • Inputs

    • 12VDC and 24VDC from Tango1B, factory wired.
    • Current Consumption: 0.6A @ 12V, 0.3A @ 24V with all relays energized
    • Main Fuse Rating 15/32A.

  • Trigger Inputs

    • Eight (8) individually controlled trigger inputs:
    • a) Normally open (NO) inputs.
    • b) Normally closed (NC) inputs.
    • c) Open collector sink inputs.
    • d) Wet Input (5VDC - 24VDC) with 10K resistor.
    • e) Any combination of the above.

• Outputs

  • Eight (8) Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max.

• Output Ratings

  • Fuses are rated 2.5A each, PTCs are rated at 2A.

• Fire Alarm Disconnect

  • Supervised: Latching or non-latching, individually selectable for any or all of the eight (8) outputs.
  • EOL: 10K Resistor.

• Indicators (LED)

  • Red LEDs: Outputs are triggered (relays energized).
  • Blue LED: FACP disconnect is triggered.

  • Individual voltage LEDs

    • Green: 12VDC
    • Red: 24VDC.