Description
Atlas Sound Q4915 15" Q Series 6 Cubic ft Enclosure, Square
| Part Number: Q4915 |
| Manufacturer: Atlas Sound |
| UPC Number: 612079117574 |
Description
Atlas Sound Q4915
15" Q Series 6 Cubic ft Enclosure, Square
This 15" Q Series enclosure have a unique acoustical fiber board permanently affixed to theinner walls of the enclosure which effectively eliminates the hangover and vibration normallyassociated with large metal enclosures. To achieve additional rigidity, unique ribsare formed on the back side of the enclosure. In addition, the inner walls are lined with11/2" (38mm) thick fiberglass with a 11/2 lb./cu.ft. density to control unwanted resonances inthe high end of the frequency spectrum.
The Q Series enclosures are constructed of 18 gauge cold rolled steel.Compound 1/2" - 3/4" (13mm-19mm) knockouts are furnished on all four sides. The frontmounting panel of the enclosure is constructed of sturdy 18 gauge steel and incorporatesthe baffle mounting plaster ring. This panel is isolated by means of a foam gasketto prevent metal to metal contact.
Two sets of slotted mounting tabs are welded on parallel sides to accept ModelQR30 mounting channels (optional) for mounting the enclosure in the ceiling.These mounting tabs may also be used for any specific mounting technique developedby the installer. It is important that the sound contractor take particular noteof the weight of these enclosures to determine suitable mounting procedures.
The entire metal enclosure is finished in black textured epoxy. Models with avolume of 1-3 cu. ft include 1/2" fiberboard. Models with a volume of 4-6 cu. ft include1" fiberboard
15" Q Series 6 Cubic ft Enclosure, Square
This 15" Q Series enclosure have a unique acoustical fiber board permanently affixed to theinner walls of the enclosure which effectively eliminates the hangover and vibration normallyassociated with large metal enclosures. To achieve additional rigidity, unique ribsare formed on the back side of the enclosure. In addition, the inner walls are lined with11/2" (38mm) thick fiberglass with a 11/2 lb./cu.ft. density to control unwanted resonances inthe high end of the frequency spectrum.
The Q Series enclosures are constructed of 18 gauge cold rolled steel.Compound 1/2" - 3/4" (13mm-19mm) knockouts are furnished on all four sides. The frontmounting panel of the enclosure is constructed of sturdy 18 gauge steel and incorporatesthe baffle mounting plaster ring. This panel is isolated by means of a foam gasketto prevent metal to metal contact.
Two sets of slotted mounting tabs are welded on parallel sides to accept ModelQR30 mounting channels (optional) for mounting the enclosure in the ceiling.These mounting tabs may also be used for any specific mounting technique developedby the installer. It is important that the sound contractor take particular noteof the weight of these enclosures to determine suitable mounting procedures.
The entire metal enclosure is finished in black textured epoxy. Models with avolume of 1-3 cu. ft include 1/2" fiberboard. Models with a volume of 4-6 cu. ft include1" fiberboard
- 6 Cubic Foot Capacity
- High Performance Enclosure For 15" Loudspeakers
- Requires 164-15A (White) Baffle
| Height | 15" (38.1 cm) |
| Width | 29ÃÃÃÃÃÃý" (74.93 cm) |
| Depth | 23" (58.42 cm) |
| Shipping Weight | 72.00 lbs (32.66 kgs) |
| Mounts Baffle | 164-15 |
| Speaker Size | 15 |
Data Sheet